The sunscreen spray nozzle cannot be pressed down. It can be: toothpick dredging, boiling water method, and changing the nozzle.
1. The reason why the nozzle cannot be pressed may be that the small hole on the nozzle is blocked. Shake the bottle to see if it is missing or solidified. If it is solidified, shake it with force. The solidified object will cause the air inside cannot be discharged, so it will not be able to be pressed. Then find a thinner toothpick or a sewing needle to dredge the small hole, and then the nozzle can be pressed.
2. Boil the water in the boiler, take a container suitable for installing the nozzle, and try to disassemble the nozzle, such as the nozzle, the nozzle seat, and the suction pipe, and put them into the container, then pour hot water into the container, and then put them back in about 3 minutes.
3. If you have used up sunscreen spray at home, you can find a similar bottle, take off its nozzle, and then install it on the broken sunscreen spray. After that, it can be used normally. This method is relatively simple and will not affect the use of spray.
