If the spray cannot be sprayed, it is recommended to check whether the small hole at the nozzle is blocked, dredge the small hole, or remove the nozzle and soak it in hot water for five minutes before installing the nozzle.
The principle of spray is to pressurize the bottle, and the liquid is sprayed out in the high-pressure system with extremely fine water particles. So when the spray cannot be sprayed out, do not treat it casually to avoid explosion and accident.
Shake the spray bottle. The nozzle of the spray column in the bottle is fixed at the same position for a long time. Due to the uneven remaining objects, the spray bottle may not eject anything. If the objects in the bottle are unevenly distributed, which causes that the spray bottle cannot eject anything, you can shake the spray bottle up, down, left and right to make the remaining objects evenly distributed, and then you can eject something.
Turn the nozzle. If the nozzle is fixed at the same position for a long time, the spray bottle will not spray anything. The nozzle of the spray bottle is generally free to rotate. At this time, you can rotate the nozzle clockwise or counterclockwise to help the spray bottle spray.
You can use the acupuncture method. If the small holes are slightly blocked, you can take the shower at home, and then put some water. At this time, pay attention to observe which holes of the nozzle are blocked to see which holes are blocked. Needling should be carried out according to the blocked area, and it can be done several times more.
If the spray head is pressed down and does not bounce back, it indicates that the spray head is stuck. At this time, gently press the spray head and try to rotate it back and forth for several times. Under the force, the spray head will pop up, so that the damaged spray head can be repaired.
