The press type pump head is a simple, convenient, and economical device used for liquid transportation. Compared to rotary pump heads, press type pump heads are easier to operate and can easily push liquids out of the container. Improper use may cause problems such as leakage and blockage of the pump head, so how to use and press the pump head correctly? The following points need to be noted:
1. Confirm the type of pump head: Some liquid pump heads are not suitable for certain liquids with different densities, so it is necessary to understand the scope of application of the pump head before use.
2. Preparation: Before installing the pump head, the container mouth and the pump head should be checked for contamination during storage. If cleaning is necessary, it should be thoroughly cleaned and disinfected.
3. Pressure balance: If the capsule pump head is not folded before initial use, the pressure may not be fully released, resulting in compressed gas leakage. To avoid this situation, slight force can be applied during the first press to ensure a balanced pressure.
4. Press the pump head: Gently tighten the circumference of the pump head by hand and press the pump head. When pressing, the pump head should be kept pressed and held down, without letting go or forcefully pressing. If it is found that the pump head can no longer be pressurized, the container can be replaced or a new pump head can be replaced.
5. Blocking situation: If the pump head is blocked, it can be gently knocked against the pump head by pouring it over the container. If this is not the case, the pump head can be gently removed and washed with clean water.
6. Full use: The pump head will soon be depleted during use, so it is necessary to ensure full use. If you pay attention to the above 5 precautions during use, you can successfully press the pump head.
