At present, the water outlet of the wash basin is set on one side of the press pump head, which requires one hand to press and the other hand to pick up the wash basin. If you only use one hand to push the wash basin to pick it up, the wash basin will become unstable. And for children, the palm is very small, and it is not convenient to use the wash basin and hand washing bottle of current technology.
The press pump head presses the pressing ring with the palm of one hand, and the space between the two check valves becomes smaller, allowing the pressure hand washing liquid to pass through. In the past, the packaging container with water discharged from the top after squeezing out was a new type of packaging container with an internal solution in the shape of petals and water discharged from the top after squeezing out. However, its structure is very complicated, the cost is high, the squeezing force is difficult to control, and it is easy to squeeze out a large amount of internal solution, causing waste.
Our company installs the press pump head clamping device on the packaging container body equipped with pumps and valves such as bottles, tubes, and cans. By pressing one button and two buttons on both sides of the cover to the bottom, the end slopes of one button and two buttons act on the piston slope, thereby forcing the piston to descend. At this time, a liquid storage chamber appears between the top surface of the piston and the cover when the pump head is pressed, and the lower end of the piston is connected to the pump core. The internal solution sucked by the pump core enters the hot water outflow channel from the container body and enters the liquid storage chamber. At this time, if you release your hand, the first button and the second button will return to their original positions under the action of the spring restoring force. The internal spring of the pump core pushes the piston back to its original position. When the piston rises, the internal solution of the pump head will be pushed upward to the hot water outlet chamber, and the hot water will be discharged from the hot water outlet hole.