Overview
No.92 is built around a PET outer bottle, and that choice shows up the moment you pick it up. PET is denser than PP, so the bottle carries real weight in the hand instead of the hollow feel of a standard airless pack - the same reason brands reach for acrylic. It can be run crystal clear, close enough to acrylic to show the fill level and the colour of the formula, or frosted and soft-touch coated for a quieter, more expensive-looking finish.
It is also a refillable system. The inner PP bottle lifts out and drops back in, so the decorated outer shell - the part carrying your printing, frosting and coating - stays in service while only the inner bottle is replaced. Pair that with PET being one of the most widely collected and recycled packaging plastics, and No.92 answers the sustainability question twice over: a recycled-stream material on the outside, a refillable insert on the inside.
Two sizes share one Ø43.5 mm footprint, and a screw neck closes with a firm stop. Inside, a vacuum piston feeds a pump delivering 0.25 ml per press - a small, controlled dose that suits concentrated skincare, and one that keeps a 30 ml pack running for roughly 120 measured presses.
Specifications
|
Item No. |
Capacity |
Height |
Diameter |
Material |
Closure |
Dispensing |
|
30ML-92 |
30ml |
121 mm |
43.5 mm |
PET, PP |
Screw |
Airless |
|
50ML-92 |
50ml |
151 mm |
43.5 mm |
PET, PP |
Screw |
Airless |
Manual measurements, ±0.5 mm. Standard output 0.25 ml per stroke; pump can be matched to your formula viscosity. Both sizes share the same Ø43.5 mm body. PET outer bottle with a replaceable PP inner bottle.
Key Features
PET Body with Real Weight - denser than PP, so the bottle sits solid in the hand rather than hollow: the heft that reads as premium on the shelf.
Acrylic-Like Clarity - run it crystal clear to show fill level and formula colour, and get the look of acrylic from a material that is widely recycled.
Replaceable Inner Bottle - the inner PP bottle lifts out and drops back in, so your printed and finished outer shell stays in use across refills.
Frosted or Soft-Touch Finish - the outer bottle takes frosting and soft-touch coating, two finishes that read high-end without moving to glass or acrylic.
0.25 ml Measured Dose - a fine, repeatable dose for concentrated formulas: around 120 presses from 30 ml, 200 from 50 ml, with no over-pouring.
Recommended Applications
Serum & essence · Eye serum · Ampoule and concentrate · Facial oil · Light lotion & emulsion · Targeted treatment and spot care
Ordering & Decoration
MOQ - 10,000 pcs per size / colour
Samples - free blank samples, freight collected
Lead Time - 30–35 days after deposit & artwork approval
Decoration - Silk screen · Hot stamping · Labelling · Frosting · Soft-touch coating · Pantone matching